Post by wintonemachinery on Dec 8, 2014 4:18:40 GMT -5
It is normal to have maize milling machine noises in operation. But it is abnormal when you hear the harsh noises from the machine sometimes, or we say maize milling machine abnormal noises. The operator should check the maize milling machine noises regularly. From the long term experience conclusion, maize milling machine abnormal noises have the following features and causes.
1. If there has uneven clash sound, this belongs to maize milling machine abnormal noises. It may be due to the crash between the impeller and the fan housing.
2. If the clearance between the stator and the rotor is not even, and the high and low sound interval keeps invariant, then this is caused by decentraction between the stator and the rotor due to bearing wear.
3. The noise from maize milling machine rotor friction belongs to the limiting condition of stator scrapping rotor. And this is also the MAIZE MILLING MACHINE abnormal noises.
4. Iron core is loose. Due to vibration in motor running, it makes the iron core fixed bolt loosen and causes iron core silicon steel sheet loose and originates noises.
5. Some noises are due to part of slot wedge popping, vibration, or the improper length of the fixed bolt of the bearing cap. Under this circumstance, we should check whether each part of the maize milling machine is loose. This is quite an effective method for solving maize milling machine abnormal noises.
janefan462@gmail.com
www.corn-milling-machine.com/
1. If there has uneven clash sound, this belongs to maize milling machine abnormal noises. It may be due to the crash between the impeller and the fan housing.
2. If the clearance between the stator and the rotor is not even, and the high and low sound interval keeps invariant, then this is caused by decentraction between the stator and the rotor due to bearing wear.
3. The noise from maize milling machine rotor friction belongs to the limiting condition of stator scrapping rotor. And this is also the MAIZE MILLING MACHINE abnormal noises.
4. Iron core is loose. Due to vibration in motor running, it makes the iron core fixed bolt loosen and causes iron core silicon steel sheet loose and originates noises.
5. Some noises are due to part of slot wedge popping, vibration, or the improper length of the fixed bolt of the bearing cap. Under this circumstance, we should check whether each part of the maize milling machine is loose. This is quite an effective method for solving maize milling machine abnormal noises.
janefan462@gmail.com
www.corn-milling-machine.com/