Post by slurry leakage on Apr 9, 2012 3:17:07 GMT -5
First, check whether the sieve mesh number is suitable for your choice.
Secondly, the sieve's specifications should be changed by the drilling depth. For example, in the preliminary stage of drilling, we can use big-hole mesh, while as depths of drilling is increasing, thin-hole mesh is necessary.
Thirdly, prenvent blocking on the mesh. We can experiment some minutes first before its working so as to reduce mesh blocking.
Finally, make sure the slurry enters reel from the sieve center by adjusting the spring plate, or extend the groovy overturn position.
Secondly, the sieve's specifications should be changed by the drilling depth. For example, in the preliminary stage of drilling, we can use big-hole mesh, while as depths of drilling is increasing, thin-hole mesh is necessary.
Thirdly, prenvent blocking on the mesh. We can experiment some minutes first before its working so as to reduce mesh blocking.
Finally, make sure the slurry enters reel from the sieve center by adjusting the spring plate, or extend the groovy overturn position.